Gold Member Since 2014
Audited Supplier
Nanjing Getwin Industrial Co., Ltd.

Heat Press Machine, Heat Transfer Machine, Sublimation Machine manufacturer / supplier in China, offering Fy - 003 Digital Manual Heat Press Machine, J-Cube Kf40/RF40 Water Based Ink for High Speed Printing, J-Eco Subly Nano Ns-60 Digital Ink for Inkjet Printing and so on.

(/ )

Supplier Homepage Product Sublimation paper Fy - 003 Digital Manual Heat Press Machine

Fy - 003 Digital Manual Heat Press Machine

FOB Price: US $130 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $130/ Piece
Get Latest Price
Production Capacity: 100 Set/Month
Transport Package: Export Wooden Case
Payment Terms: T/T, Paypal, Money Gram, Western Union

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: FY - 003
  • Plate: Heat Transfer Printing, Digital Format Printing
  • Color & Page: Multi-Colour Printing Press
  • Printing Speed: 3-8m/Min
  • Temp Range: 0-999s
  • Gross Weight: 25.4kg/31.5kg
  • Voltage: 110V/220V
  • Printing Area: 38cm X 38 Cm / 40cm X 50 Cm / 40 Cm X 60 Cm
  • Trademark: SKYIMAGE
  • Origin: Jiangsu, China
  • Type: Pin-on
  • Structure: Flat-Bed Cylinder Press
  • Species: Continuous
  • Printing Plate: Heat Transfer Printing
  • Power: 1400W
  • Certificate: CE
  • Max Temp: 250
  • Package Size: 72.5 X 44 X 45cm / 72.5 X 68 X 45 Cm
  • Specification: CE
  • HS Code: 844339900
Product Description
FY - 003 Digital Manual Heat Press Machine 

Priting Area(CM)38*3840*50
Temperature Range(°C)260260
Time Range(S)0-990-99

1) The temperature is controlled by electro-thermostat to ensure a high accuracy(±2).
2) Security, durability and even heat distribution are achieved by integration of heat line and heat plate.
3) TEFLON coating on the heating plate.
4) It's controlled by electronic time; signal light indicated the completion of process.
5) Pressure is adjustable.

Plug the socket, turn on the power of machine, then indicator is working.
Attention: proper and stable protective ground-wire must be prepared for whole machine.
One: adjust the temperature to requested temperature, which usually between 120°C-200°C.
Two: set the timer to request time which usually between 5s-20s.
Three: put the material on the lower plate then place transfer paper (pay attention on front and back of it), Press handle till the end.
Attention: Strength mustn't exceed thirty kg to protect normal working of handle.
Four: buzzer is working when timer indicated completion of hot-stamping, then replace the handle.
Five: if cold peel thermo printing paper, erase it by brush within five to ten seconds then peel the thermo printing paper.
If hot peel thermo printing paper, erase it immediately after completion of printing.
Perfect thermo-printing requires the cooperation of correct time, temperature and time.
All transfer paper must be tested before mass-produce.

1. Pressure: if pressure is insufficient or too strong,adjust the pressure nut. +means pressure increase while - means decrease.
2. Time: if the buzzer doesn't work or continuously works when time is up, touch contact of micro-switch in after body box must be checked to see if it needs adjusting. If so, adjust it to a suitable position.
If heating plate doesn't work several minutes after operation, please check the circuit.
3.Temperature: when temperature is up, and it will take approximately 15 minutes to reach 180°C.
If heating plate doesn't work several minutes after operation, please check the circuit.

If you are intested in our products, please contact me without any hesitaion.
I am look forward to your enquiry.
Send your message to this supplier
Ms. Vera
To: Ms. Vera

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now